SigmaDesigns

zurück zu Datapath

Vision RGB-E1s

   

The VisionRGB-E1s has a single capture channel supporting up to 1920x1080 DVI or 2048x1536 Analog resolution.

The VisionRGB-E1s captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.

When a Datapath graphics card is used, the VisionRGB-E1s transfers the data directly to the graphics card thereby increasing performance. The VisionRGB-E1s sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.

When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E1s sends the data to system memory or direct to the graphics card, dependant on the software used for display.

The VisionRGB-E1s is an ideal solution for applications that require the capture of Analog or DVI sources in real time. Typical applications include:

  • Viewing Analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment

  • Streaming video applications

  • Video/Data Wall Controllers

RGB streaming

The VisionRGB-E1s is an ideal solution for applications that require the capture of Analog or DVI sources in real time. Typical applications include:Viewing Analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipmentStreaming video applicationsVideo/Data Wall Controllers.

Features

  • Single channel RGB/DVI/HD capture card (PCI-Express)
  • Four Lane PCIe interface with a maximum data rate of  650MB/sec
  • Maximum analog RGB capture resolution of 2048 x 1536 x 24bit
  • Maximum DVI capture resolution of 1920 x 1200 x 24bit 
  • HD modes using the supplied  DVI/ Component Adapter or DVI/HDMI Adapter (HDCP not supported)
  • On card processor for real time mode and sync detection
  • Support for multiple cards allowing up to 32 capture channels. (32 cards)
  • Direct DMA driver software and streaming driverHigh quality down scaling
  • Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8 video formats
  • High performance DMA to system memory or direct to graphics memory with scatter gather
  • Support for separate H/V sync, Composite sync or Sync on Green 16 cropping windows per capture channel
  • Includes WDM streaming drivers and the Datapath Vision application software
  • Fully integrated with the Datapath Wall Control software for video wall applications
  • VisionRGB-E1s is also optimised for operation with the Datapath range of graphics cards
  • Support for Windows® XP/ Vista/ Server 2003/Server 2008/Windows® 7Datapath SDK included for software developers

VisionRGB-E1s Specifications

 

Board Format:
PCIe x4 low profile card, 68.9mm x 167.6mm
PCIe bus master with scatter gather DMA providing
Maximum data rate of 650MB/s 
Connectors: One DVI-I type connector
Maximum Sample Rate:
170Mpixels per second analog RGB or 165 MHz DVI
Analog modes up to 340MHz pixel clock can be captured using dual-pass sampling
Video Sampling: RGB: 24bits per pixel/ 8-8-8 format
Video Capture Memory: 32MB, triple buffered
Analog RGB Mode Support: 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 2048 x 1536, custom modes
DVI Single Link Mode Support:
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1500 x 1200, 1920 x 1080, 1920 x 1200, custom modes
HD Modes:
1080p, 1080i, 720p, 576p, 576i, 480p and 480i using a Component-DVI connector (HDCP not supported)
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal
Pixel Transfer Formats
RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels
YUV: 4:2:2
MONO: 8bits
Update Rate:
User defined, captured frame rate will match the source. Providing max data rate (650MB/s) is not exceeded
Multi-buffered to eliminate tearing artifacts
Video Format Options:
Analog RGB plus HSync and VSync (5 wire)
Analog RGB with Composite Sync (4 wire)
Analog RGB with Sync on Green/ YPbPr (3 wire)
DVI Single Link
Operating System Support: Windows® XP, Windows® Vista, Windows® Server 2003, Windows® Server 2008 and Windows® 7
Power Requirements
Max current at +3.3V - 0.25A
Max current at +12V - 0.5A
Max power - 6.8 Watts
Operating Temperature: 0 to 35 deg C/ 32 to 96 deg F
Storage Temperature: -20 to 70 deg C/ -4 to 158 deg F
Relative humidity: 5% to 90% non-condensing
Warranty: 3 years

 

  Click here to download the product datasheet

 

nach oben