Datapath

Features:

Component HD up to 1080P at 60 frames per second (1)
HDMI up to 1080P (1,2,3)
DVI up to 1920 x 1200
RGB/VGA up to 2048 x 1536

1 Requires optional Component HD-DVI adapter
2 Audio not supported
3 HDCP not supported

Software Included:

VisionRGB application for real time capture and display
WDM Streaming drivers for use with Microsoft Media Encoder® and other 3rd party applications
Software Development Kit with example application

Streaming Support:

DirectX WDM Streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:

Microsoft Media Encoder®
VLC
StreamPix
VirtualDub
Adobe Flash Encoder
AMCap
Any other DirectX encoding software

Advanced Features:

DMA transfers the data across the PCI bus without using host CPU cycles
On board processor minimises system CPU load
When used with the Datapath range of graphics adapters, the CPU load is negligible even if the image is being upscaled to a video wall, resulting in real time performance
The VisionRGB-X2 captures data at a maximum pixel rate of 340MHz. Once captured, the data is converted to either 555, 565 or 888 pixel and YUV mode formats and then transferred over the PCI bus to host memory, for display on the desktop
Dynamic Input Source Selection
Administrator Mode
Update Indicator
The VisionRGB-X2 application program is also built into the Datapath Wall Control software for video wall systems

Video Walls

The VisionRGB range of capture cards are fully integrated with the Datapath family of Video Wall display products. The VisionRGB-X2 captures the display output (component HD, HDMI, analog RGB or single link DVI) from one source and then displays it as an independent application on your Video Wall. This is done in real time, enabling you to view data from PCs, MACs, industrial/medical equipment, cameras and other video equipment.

The VisionRGB-X2 has two connectors for feeding independent data sources directly into your main PC. The VisionRGB-X2 captures the HD/HDMI/RGB/DVI data and stores it in an on-board video buffer. This data is then copied using Direct Memory Access (DMA) to the host system for display.

The VisionRGB-X2 has a powerful software application to automatically configure the timing and the format of the input source and display the captured data.

Additional Applications

The VisionRGB-X2, a stand alone PCI-X plug in card, delivers extreme performance with 480MB/s transfer bus bandwidth. This industry beating performance makes the VisionRGB series ideal for a wide range of applications including:

Medical Imaging: Capture legacy RGB modalities
Multi-display presentation software: Recommended by industry leaders Dataton WATCHOUT™
Digital Signage: Integrated by C-nario into their world class, open platform digital signage software solutions
Machine Vision: Acquire high resolution camera outputs
Voyage Data recorders: Capture radar images
Simulation/Military: Acquire high resolution video and simulation for command and control

Supplied Adapter/Cables

Supplied Adapter/Cables
RGB-DVI Adapter
Optional Adapters
HDMI-DVI Adapter
Component HD-DVI Adapter

Application Guide

RGB App

VisionRGB-X2 Specifications

Board Format:	64 bit, up to 133MHz PCI-X, half size plug-in card 105mm x 170mm. PCI Bus Master with scatter/gather DMA providing up to 1GB/sec peak, 500MB/sec sustained.
Connectors:	Two DVI-I type connectors.
Maximum Sample Rate:	170 Mpixels per second RGB or 165MHz DVI.
Video Sampling:	RGB: 24 bits per pixel/8-8-8 format.
Video Capture Memory:	32 MB per channel (updated in real time). Triple buffered.
Analog RGB Mode Support:	640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920 x 1080, 2048 x 1536, Custom modes.
DVI Single Link Mode Support:	640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1920 x 1200, and Custom modes.
Input Mode Detection:	Automatic detection of input modes in hardware enabling the tracking of mode changes in the source signal.
HD Modes	1080p, 1080i, 720p, 567p, 480p and 480i using a Component HD-DVI connector (HDCP not supported)
Pixel Transfer Formats:	RGB: 555, 565 or 888 pixels, 8 bit monochrome. YUV 4:2:2, UYVY, YUY2, YVYU
Update Rate:	User defined, typically up to 60 frames per second, limited by available bandwidth. Triple buffered to eliminate tearing artifacts.
Video Format Options:	Analog RGB plus HSync and VSync (5 wire). Analog RGB with Composite Sync (4 wire). Analog RGB with Sync on Green (3 wire). DVI Single Link.
Operating System Support:	Windows® XP Professional (x86 and x64), Windows® Server 2003 (x86 and x64), Windows Vista® (x86 and x64), Windows® Server 2008 (x86 and x64) and Windows® 7
Power Requirements:	Max current at +3.3V – 0.5A Max current at +5V – 1.7A Max power - 10 Watts
Operating Temperature:	0 to 35 deg C.
Storage Temperature:	-20 to 70 deg C.
Relative Humidity:	5% to 90% non-condensing.
Analog Input Range:	Min 0.5Vpp Max 1.0Vpp
Input Offset:	+/- 2V
Hsync:	15kHz - 110kHz
Vsync:	No hardware limits, typically 25Hz - 200Hz for real signals
Separate Sync Polarity:	Positive or Negative. (Separate H & V sync, Composite Sync)
Sync On Green Polarity:	Negative
Inputs	75 Ohm terminated