VisionSD4+1 - Four Channel Video and One Channel RGB/DVI Capture Card
Features:
Component HD up to 1080P at 60 frames per second (1)
HDMI up to 1080P (1, 2, 3)
DVI up to 1920 x 1200
RGB/VGA up to 2048 x 1536
Four Composite/S-Video inputs
Maximum Video Capture Resolution 720x576
Supports Deinterlacing
Data transfer at 480MB/s
1
Requires optional Component HD-DVI adapter
2 Audio not supported
3 HDCP not supported
The VisionSD4+1 is an ideal solution for applications that require the capture of an RGB/DVI source simultaneously with up to four SD video sources. Typical applications include:
Viewing Analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment
Streaming video applications
Video/Data Wall Controllers
Software Included:
Wall Control - presents a representational window of the entire display wall showing position and size of video windows
Software Development Kit with example application
Streaming Support:
DirectShow drivers for WDM Streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
Microsoft Media Encoder®
VLC
StreamPix
VirtualDub
Adobe Flash Encoder
AMCap
Any other DirectShow encoding software
Supplied Adapter/Cables
| Supplied Adapter/Cables | |
| RGB-DVI Adapter |
 |
| BNC16-Cable |
 |
| Optional Adapters | |
| HDMI-DVI Adapter |
 |
| Component HD-DVI Adapter |
 |
Advanced Features
High performance DMA to system memory or direct to graphics memory with scatter gather
On board processor for real time mode and sync detection
When used with the Datapath range of graphics adapters, the CPU load is negligible even if the image is being upscaled to a video wall, resulting in real time performance
The VisionSD4+1 captures data at a maximum pixel rate of 340MHz. Once captured, the data is converted to either 555, 565 or 888 pixel and YUV modes display formats and then transferred over the PCI bus to host memory, for display on the desktop
Dynamic Input Source Selection
Administrator Mode
Update Indicator
The VisionSD4+1 application program is also built into the Datapath Wall Control software for video wall systems
Video Walls
The Vision range of capture cards are fully integrated with the Datapath family of Video Wall display products. The VisionSD4+1 captures the display output (component HD, HDMI, analog RGB or single link DVI) from one source and then displays it as an independent application on your Video Wall. This is done in real time, enabling you to view data from PCs, MACs, industrial/medical equipment, cameras and other video equipment.
The VisionSD4+1 has a DVI connector for feeding an independent data source directly into your main PC. The VisionSD4+1 captures the HD/HDMI/RGB/DVI data and stores it in an on-board video buffer. This data is then copied using Direct Memory Access (DMA) to the host system for display.
The VisionSD4+1 has a powerful software application to automatically configure the timing and the format of the input source and display the captured data.
The VisionSD4+1, a stand alone PCIe x4 plug in card, delivers extreme performance with 480MB/s transfer bus bandwidth. This industry beating performance makes the Vision series ideal for a wide range of applications including:
Medical Imaging: Capture legacy RGB modalities
Multi-display presentation software: Recommended by industry leaders Dataton WATCHOUT™
Digital Signage: Integrated by C-nario into their world class, open platform digital signage software solutions
Machine Vision: Acquire high resolution camera outputs
Voyage Data recorders: Capture radar images
Simulation/Military: Acquire high resolution video and simulation for command and control
Application Guide
VisionSD4+1 Specifications
| Board Format: |
PCI-e x4 plug-in card, 110mm x 204mm.
PCI-e bus master with scatter gather DMA providing maximum data
rate of 480MB/s.
|
| Connectors: | One DVI-I type connector and one D connector for SD inputs. |
| Maximum Sample
Rate (RGB/DVI): |
170Mpixels per second analog RGB or 165 MHz DVI.
Analog modes up to 340MHz pixel clock can be captured using
dual-pass sampling.
|
| Video Sampling: | RGB: 24 bits per pixel / 8-8-8 format. Video: 16bits per pixel/YUV format. |
| SD Maximum Capture Resolution: | 720x576x16bit. |
| Video Capture Memory: | 64 MB, triple buffered. |
| Analog RGB Mode Support: | 640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 2048x1536, custom modes. |
| DVI Single Link Mode Support: | 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1900 x 1200, and custom modes. |
| HD Modes: | 1080p,1080i, 720p, 576p, 576i, 480p and 480i using a Component HD-DVI Adapter (HDCP not supported). |
| Input Mode Detection: | Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal. |
| Pixel Transfer Formats: | RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels. YUV 4:2:2, UYVY, YUY2, YVYU |
| Update Rate: | User defined, captured frame rate will match the
source providing max data rate (480MB/s) is not exceeded. Multi-buffered to eliminate tearing artifacts. |
| Video Format Options: |
Analog RGB plus HSync and VSync (5 wire).
PAL, NTSC, SECAM or S-Video for SD inputs.
|
| Operating System Support: | Windows® XP Professional, Windows® Server 2003, Windows Vista®, Windows® Server 2008 and Windows® 7. (x86 and x64 Operating Systems) |
| Power Requirements: |
Max current at +3.3V – 0.25A.
Max power – 15 Watts.
|
| Operating Temperature: | 0 to 35 deg C. |
| Storage Temperature: | -20 to 70 deg C. |
Click here to download the product datasheet
Click here to download the latest driver
Click here to download the User Manual