For systems that require an extension of the SIP video bus into an expansion chassis.

The SIP-Link Board allows you to expand the SIP video bus from your PC and/or an Expansion Chassis to a second Expansion Chassis by converting the SIP video bus to dual link DVI.

Simply plug one SIP-Link Board into the first PC or Expansion Chassis in the last PCI slot in the SIP bus chain and connect to the Mosaic-SQ16 or Mosaic-HQ using the SIP-Cable.  The SIP Link Board then transmits the SIP bus, via a dual link DVI cable to a receiver on the second SIP-Link Board which is the first board in the SIP bus chain in your expansion chassis.  The receiving SIP-Link Board is then connected to your Vantage4-SIP or iH4 SIP card.  The SIP-Link Board does not require any software drivers.

SIP-Link Board Specifications

Board Format:	32bit 66Mhz PCI adapter (Uses power only, no drivers required)
Board Size:	105mm x 310mm.  Full size
Power Requirements:	Transmitting Board: +5 at 550mA +3.3V at 650mA Receiving Board: +5V at 750mA +3.3V at 800mA
Operating Temperature:	0 to 35 deg C.