zurück zu Vitec

Extensor HDMI2SDI

 

 

 

HDMI supports 12 bit full depth acquisition.
The two HD-SDI outputs can drive two different equipments simultaneously at same or different resolution (ie: 1080p & 720p). OSD Status gives you all status information (ie: video signal detected, resolution and so on...) which are displayed overlaid on the video output signal. One can also select a standardized colorbar pattern on the video output signal to properly calibrate yours equipments.

 

  •  HDMI TO HD-SDI Converter

    Frame rates supported:
    1080p, 720p at 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 fps
    1080i at 25 / 29.97 / 30 fps
    576p, 480p, 576i, 480i at 25 / 29.97 fps


    - 2x HDMI v1.3

    - 1x Digital audio embedded in HDMI
    - 1x Analog Stereo Unbalanced


    - 2x HD-SDI (3Gb/s) for redundant output
    Downscaling available for each output
    (progressive > progressive
    or interlaced > interlaced
    or interlaced > progressive)

    SDI Compliance: SMPTE-259M, SMPTE-292M & SMPTE-424M

    - Embedded audio in SDI


    - Upgradability through USB connector
    - Lockable connector
    - Auto-adaptation SD & HD
    - 3Gb/s
    - PsF mode
    - Status LED indicator
    		•


    Video Conversion : 1x HDMI (v1.3)
    to 2x HD-SDI (3Gb/s)
    Video Inputs : 2x HDMI
    Video Outputs : 2x HD-SDI
    Audio Inputs : 1x Digital audio embedded in HDMI / 1x Analog Stereo Unbalanced
    Audio Outputs : 1x Embedded audio in SDI

     

    nach oben